Office Window Treatments

Office Window Treatments in Cicero by Cicero Window Treatments

Surveyed by elevation, controls placed before the furniture

Call (317) 863-9966Get Free Quote
Quick Answer

Answers to the common questions on this service, written the way we'd explain it at your window. If the terminology is unfamiliar, the questions below define it as they go.

  • Service: Office Window Treatments for Cicero homeowners
  • Service area: Cicero, IN and surrounding areas
    • We schedule measures promptly and we're honest about what comes after. Your product is manufactured to your dimensions, which takes weeks rather than days, and that applies to every custom line we sell.
  • Insured and bonded
  • Serving Cicero, IN since 2008
Office Window Treatments Services

Expert Office Window Treatments for Cicero Homes

Office work in Cicero is small format and it repeats badly. The town covers 2.041 square miles with 5,581 residents, so the leasable inventory is the Jackson Street business block, professional suites along the State Road 19 corridor, and space in buildings that were something else first. A good share of that sits in the 239 parcels inside town limits recorded before 1950, where openings on one floor don't repeat and the casing is original. Out on the unincorporated side of 46034, the same tenant may occupy a newer building with square openings. One specification will not cover both, and a manager who assumes it will gets two bad results.

Two decisions drive an office job. Glare is an openness factor decision, not a fabric color decision: a 1 percent weave protects screens and closes down the view, a 5 or 10 percent keeps the outlook and lets more veiling light onto a monitor. The right answer differs by orientation, so we survey by elevation rather than by floor. The second is control placement. Operating hardware has to sit within ADA reach ranges and clear of workstations and circulation, and we'd rather set that at the schedule stage than move a wall control after the furniture lands. Custom fabrication runs 2 to 5 weeks, so both decisions belong early.

When to Call

Signs You Need Office Window Treatments

If you notice any of these in your Cicero home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Everyone on a video call reads as a silhouette

Half the shades on one elevation sit at different heights

Shade fabric has gone brittle at the hembar

Controls sit above a credenza nobody can reach past

Somebody yanked a chain until the clutch gave out

A conference room cannot hold a projected image

A sublease is ending and the shades stay behind

Staff have taped paper over one window

No one on staff can name the fabric on the existing shades

Batteries are being swapped a floor at a time

Our Process

How Cicero Window Treatments Handles Office Window Treatments

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Site walk with facilities and tenant

2

Every opening field verified

3

Control reach and force checked

4

Fabrication released after approval

5

Repeater and hub placement planned

Real Project Photos

Office Window Treatments in Cicero

Photographs from real office window treatments jobs completed by our crew in Cicero and surrounding areas.

Custom shades measured and installed in CiceroPlantation shutters fitted to a Cicero windowCellular shades in a Cicero living room
Scope of Work

What Office Window Treatments Includes

Every Cicero job is documented item by item. Here is what the crew covers.

Site walk with facilities and, where the space is leased, with the tenant coordinator, so scope boundaries are settled before pricing

An opening schedule built with a number on every opening, then field verified rather than typed off the base building drawings

Elevations recorded by orientation, since the glare problem on the west face is not the problem on the north face

Workstation and monitor layout reviewed against each elevation, because screen glare is what generates the complaints

Openness factor selected per elevation and proven with a full-size sample hung on the actual glass before release

Conference and AV rooms identified early, as those want darkness on demand rather than daylight management

Control heights set inside the ADA section 308 reach ranges wherever the space requires compliance

Operating force checked against the five pound limit in ADA section 309.4 on every manual control specified

Motorization specified on the openings where no manual control can meet reach or force, rather than across a whole floor by default

Flame propagation test documentation obtained and placed in the submittal wherever the occupancy and the authority having jurisdiction call for it

Submittal package assembled with cut sheets, fabric and hardware samples, and a shade schedule tied to the opening numbers

Fabrication released only after approvals are back, since the factory clock starts at approval and not at order

Coupled tubes and aligned hembars drawn across a continuous run so a partly lowered wall reads as one line

Group addressing planned on motorized floors so one control drives a zone instead of five

Work sequenced suite by suite so no tenant loses a whole floor at once, with badges, freight elevator windows and staging agreed before the first crew day

Attic stock quantities agreed at contract, with dye lot movement between phases disclosed at the same time

Every promised date put on paper at release, with any slip from the factory passed to you the day we hear about it

Closeout documentation handed to facilities with fabric identification, hardware detail and the shade schedule for future reorders

Pricing

What Office Window Treatments Cost in Cicero

Office work prices per opening from a measured schedule, not per square foot and not per floor. The national ranges worth anchoring against are roughly $250 to $2,600 per window for custom-fabricated shades and roughly $300 to $1,500 per window installed for motorized product. Those are national category figures and they are not a bid for a building in Cicero. Volume pulls the number down when a floor plate has a hundred openings of four repeating sizes. Fire test documentation, submittal cycles, phased after-hours access and specialty shapes all push it the other way. A Hamilton County property with a dozen odd openings on a curved elevation is a different bid from a rectangular floor plate with the same count. Cicero Window Treatments prices from the opening schedule with the control specification written into it.

By Product

How Office Window Treatments Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Solar screen roller shades: The workhorse of an office fit-out. One fabric decision drives daylight, glare and outward view together, and the openness number is where that decision actually gets made. Specify by elevation, because one fabric across four orientations satisfies nobody.

Dual roller assembly: A screen in front and a room darkening fabric behind on one bracket set. It's the right answer for a conference room that hosts a daylit meeting at ten and a projected presentation at two, and it costs less than fighting that battle with one fabric.

Coupled tubes across a run: Multiple shades driven as one continuous line across a long elevation, with hembars aligned. It's what stops a wall of glass looking ragged when the shades are halfway down, and it's a detail nobody notices until it's missing.

Low-voltage motorization: Hardwired motors on a building where nobody wants a battery program across two hundred openings. The header power is run by a licensed electrical contractor as part of trade coordination, and it wants to be in the base scope rather than added late.

Battery motorization for tenant retrofit: Where a lease or a finished wall rules out opening anything, battery motors get automation into an occupied suite. Budget the interval honestly: a floor of battery shades cycling daily is a recurring facilities task, not a one-time purchase.

ADA-compliant wall keypad: A fixed control mounted inside the section 308 reach ranges and operable well under the five pound force limit in 309.4. On a large shade where a chain would fail the force test, this is usually the cleanest route to a compliant control.

Scheduled and sensor-driven control: Shades that move on an astronomical timer or a facade sensor rather than on somebody remembering. It cuts the complaint volume more than any fabric choice does, because the shade is already down when the sun comes around.

Blackout with pocket and channels: A darkening fabric plus a light-blocking pocket at the header and channels at the jambs. Training rooms and AV rooms need the assembly, not just the fabric, because light comes around the edges of any inside mount.

Cassette and fascia treatments: An enclosure over the roll so the top of the opening reads as a finished line rather than a row of exposed tubes. On a building standard package this is usually what makes the shades look like part of the architecture.

Building standard shade package: One specification written once and applied across every suite: fabric, openness, hardware, color and mounting. It keeps the exterior appearance consistent from the street and makes reorders trivial two tenants later.

Common Questions

Office Window Treatments FAQ

Questions we hear most often from Cicero homeowners considering office window treatments.

It depends which way the room faces, and we survey elevation by elevation rather than issuing one number for the building. A 1 or 3 percent weave is the working range where screens face a window and the elevation takes direct sun, because it cuts the veiling reflection that makes staff tilt monitors. A 5 or 10 percent keeps a view and works on a shaded or north facing elevation. On a suite looking west toward Morse Reservoir, where the surface throws light back at the building on top of the direct beam, we go tighter than we would inland on the State Road 19 corridor.
Within ADA reach ranges, clear of desks and clear of the circulation path, and that gets decided on the schedule rather than on install day. A chain or wand mounted behind a filing cabinet is a shade nobody operates, and an operator that hangs into a walkway is a hazard. We mark control side and mounting height for every opening in the survey document, coordinate against the furniture plan where one exists, and fix chain tensioners to the wall so nothing swings free. Where reach is genuinely impossible, that opening gets motorized and a wall control instead.
Yes, and the mount will usually be outside rather than inside. Buildings in the village core carry original casing profiles, shallow or absent jamb returns and storm build ups, and openings on one floor were altered at different dates. That leaves inside mount off the table on a good share of them. Mounting to the casing face gives the bracket solid material, lets us overlap the opening, and closes the light line at the same time. We number every opening and measure each at head, middle and sill, because two windows that look identical from the sidewalk regularly differ by half an inch at the top.
An opening schedule keyed to your drawings, with a number, dimensions, mount type, control side and product for every window. Manufacturer product data and fabric specifications go with it, including openness factor, composition and any flame propagation test documentation the specification calls for. We list the fabric and the production run we're reserving, and we state the lead time, which for custom fabrication runs 2 to 5 weeks. If a specified fabric is unavailable in the quantity required, we say so in the submittal instead of substituting quietly and letting you find out on site.
With a room darkening cloth plus edge control, because the fabric alone never does it. A shade has to be fabricated narrower than its opening in order to travel, so light comes around the sides regardless of how opaque the cloth is. Channels at both jambs plus a pocket behind the head shut down most of it. On a west facing room in a building near the reservoir, where afternoon light arrives with a reflected component off the water, we'd specify channels rather than argue about it. Motorizing the bank onto one scene means the room goes dark in a single action.
We do, and the handover document is what makes that possible years later. Commercial shades wear at the operator and at the lift, so chains, clutches and motors are the parts that come up, and every one of them depends on knowing what was installed. We leave you a schedule listing manufacturer, product, fabric, dye lot and control type per opening. On motorized banks we add the pairing method and the travel limit procedure. A facilities manager who inherits the building three years later can order a part from that document without anybody guessing.
By testing it on the elevation that has the problem, not by choosing from a book. Openness is the percentage of the weave that is open, so a 1% fabric blocks most and shows least, and a 10% keeps the view and does less about glare. The real test is whether somebody can read a monitor at the worst hour on the worst wall. We hang a full-size sample on the actual glass and let staff sit under it for a day. Getting this wrong across a Cicero floor plate is expensive and entirely preventable.
Almost never, and specifying one fabric everywhere is the most common mistake we see. A west elevation takes low direct sun in the afternoon and needs the tightest weave you can tolerate. A north elevation gets diffuse light all day and a tight fabric there just makes the space gloomy. East is a morning problem, south changes character between summer and winter as the sun angle drops. Specify by orientation and you fix the complaints. Specify by budget line and you inherit them.
Reach and force, and they are separate tests that fail separately. ADA section 308 governs where an operable part is allowed to be, which decides the mounting height of a keypad and how far a chain can sit from a position somebody can get to. ADA section 309.4 governs how hard it is allowed to be to use: five pounds maximum, one hand, no tight grasping and no twisting of the wrist. Height is the easy one to draw. Force is the one that surprises project teams, because a big shade on a chain can be perfectly reachable and still take more than five pounds to move. An opening that fails on force gets a motor and a fixed keypad, which satisfies both tests at once.
Only if the whole floor has a reason. Motorize where openings are high, behind furniture or otherwise unreachable, where manual controls fail reach or force, and where the shades should move on a schedule rather than on somebody noticing the sun. Leave manual where openings are ordinary and accessible, because every motor is a cost and a future maintenance item. Specifying per opening rather than per building is what keeps the bid honest and the facilities workload sane.
Fabric and hardware samples, manufacturer cut sheets, a shade schedule keyed to your opening numbers, mounting details, and flame propagation test documentation wherever the occupancy and your code official require it. That last one is where projects stall. A fabric somebody believes is compliant with no document behind it gets rejected at review, and the factory clock hasn't started yet at that point. We assemble the package as part of the scope rather than as an extra.
Custom fabrication typically runs two to five weeks, and that clock starts when approvals come back, not when the purchase order is issued. Add the submittal and review cycle in front of it, and a large order with multiple fabrics behind it. A realistic sequence is samples out, approvals back, release to fabrication, then a phased install. We put every date in writing and update it in writing when the factory moves one, because building an occupancy date on a verbal lead time is how a floor gets handed over with bare openings.
Yes, and phasing it is normal. Work gets broken down by floor, wing or suite with a schedule agreed in advance, and some areas are better after hours while a vacant conference room mid-morning is perfectly fine. What has to be sorted before the first crew day is access: badges, elevator use, where material stages and where packaging goes. In our experience access derails commercial installs far more often than product does.
One worth planning for. Fabric runs in dye lots, and a run woven eighteen months after the first can sit slightly off the original under strong daylight. Inside a suite that's usually invisible. Across one continuous elevation where phase one and phase two meet at a column, it can be obvious. Two ways to manage it: order the whole quantity at once and store it, or draw the phase boundaries where a wall breaks the sightline rather than mid-elevation.
Spare units held on site in the common sizes so facilities can swap a damaged shade the same week rather than wait on a fabrication run for one opening. The right quantity depends on your opening count and how many repeating sizes you have. On a floor plate with four repeating widths, a handful covers you for years. We agree the number at contract because ordering spares with the main run costs a fraction of ordering one later.
We can price from them. We won't order from them. Field measurement is ours and we treat it as a hard requirement rather than a preference, because as-built conditions move during construction and custom product cut to a drawing is product that doesn't fit and can't be sent back. In practice that means the openings need to be framed and reasonably finished before we come out, and that dependency belongs in the construction sequence rather than getting discovered near turnover. It is a short conversation at a schedule meeting and a long one during a reorder.
Two shades on one bracket set. The screen sits down through most of the week so the room stays daylit and the glass stays usable, and the darkening fabric only travels when somebody needs a projected image to hold contrast. If the room is genuinely presentation critical, budget the head pocket and the side channels at the same time as the fabric, because a darkening shade hanging inside the opening leaves a bright outline that shows up on screen. The fabric is the cheap half of that specification. The enclosure is the half that produces the result.
A closeout document that names the fabric, the openness, the color and the hardware for every opening, the shade schedule keyed to your opening numbers, operation and cleaning guidance, the attic stock count and location, and the warranty terms. It exists so that in three years somebody can reorder one shade correctly without anyone remembering the original project. The packing list in a drawer is not a substitute, and it never survives a facilities manager changing jobs.
The products conform to ANSI/WCMA A100.1-2022 on cord access. That's a product standard and it's the correct way to describe it. A company does not hold that certification, and any vendor telling you theirs does is describing something that doesn't exist. Where energy performance sits in your specification, it belongs there as product-level test data with a document behind it rather than as any kind of company credential.
Frequently, and the answer starts with identification rather than with a bid. Send us an existing unit or whatever documentation survived the original project, and we'll name the fabric, the openness and the hardware if the line is current. Two things to plan around. Weaves leave production, sometimes within a few years, and a discontinued fabric has no substitute that looks identical under daylight. Current fabrics still weave in batches, so new product beside eight year old product can read slightly off on a bright afternoon. Where the match won't be clean, doing a full elevation reads better than one patched opening in the middle of a run.
Areas We Serve

Office Window Treatments Across Cicero

We measure and install in every one of these Cicero neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Cicero

Cicero Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Cicero

PVC where lake air would move real wood

Learn more →

Wood Blinds in Cicero

Basswood for the dry rooms, honestly specified

Learn more →

Vertical Blinds in Cicero

Built for the door wall, weighted for the breeze

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Cicero

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Cicero, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 863-9966
Service area

Serving Cicero and the surrounding area

Call NowGet Quote