Roller Shades

Roller Shades in Cicero by Cicero Window Treatments

Flat cloth, clean cassette, published light gaps

Call (317) 863-9966Get Free Quote
Quick Answer

Before you commit to this product, check the answers on lead time, care and warranty coverage. Those three are where expectations and reality most often diverge on a custom order.

  • Service: Roller Shades for Cicero homeowners
  • Service area: Cicero, IN and surrounding areas
    • Realistic sequence: appointment for the measure, a written specification, then fabrication of two to five weeks, then install. None of it needs rushing, and pushing the factory is where mistakes on custom sizes come from.
  • Insured and bonded
  • Serving Cicero, IN since 2008
Roller Shades Services

Expert Roller Shades for Cicero Homes

Roller shades suit the newest quarter of Cicero, and there is more of it than the town's size suggests. 222 of Cicero's 1,951 single family houses with a recorded year built date from 2020 or later, an 11.4 percent share that runs ahead of Fishers at 8.7 and Carmel at 4.6. Tamarack alone put up 270 houses between 2019 and 2023, and Auburn Estates records every one of its roughly 34 parcels as built in 2022. Those openings are square set with black frames and oversized rear sliders. A flat roller in a cassette is the cleanest thing you can hang in front of that kind of window.

Now the part most quotes leave out. Lutron publishes an inside mount light gap of 3/4 inch per side on its Roller 20/64, on top of a standard factory deduction of 1/16 inch per side. That gap is geometry, not a defect, and it gets larger on shades 120 inches and taller or at a height to width ratio past 4 to 1. On a bedroom you want dark, we either mount outside and oversize, or we add side channels and a light blocking pocket. Roll direction matters too: a reverse roll clears a deep sill but won't work behind a fascia.

When to Call

Signs You Need Roller Shades

If you notice any of these in your Cicero home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

You want to see out without being seen from outside

The shade drops onto a crank every time

Hardwood floors have faded in a stripe by the window

Old vinyl rollers snap back on their own

The chain hangs loose with no tensioner fitted

New shades will not join the house automation system

The bottom bar hangs crooked against the sill line

A wide window needs two shades moving together

Fabric rolls crooked and rubs one bracket

Light leaks down both sides of every shade

Our Process

How Cicero Window Treatments Handles Roller Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Hardware inside the opening noted

2

Three widths and three heights

3

Corner-to-corner square check

4

Fascia or cassette settled

5

Openness factor chosen per elevation

Real Project Photos

Roller Shades in Cicero

Photographs from real roller shades jobs completed by our crew in Cicero and surrounding areas.

Custom shades measured and installed in Cicero
Scope of Work

What Roller Shades Includes

Every Cicero job is documented item by item. Here is what the crew covers.

Roll direction decided at the measure, regular or reverse, and written onto the order in plain words

Cranks, locks and handles inside the opening noted, because a regular roll drops the fabric straight onto them

Fascia and reverse roll checked against the manufacturer's own rules, since Lutron doesn't offer that pairing

Three widths and three heights taken per opening, plus a corner-to-corner square check

Mounting depth measured for the tube and bracket, then measured again if a cassette or fascia is wanted

Tube diameter sized to the finished width and the fabric weight so a long roll doesn't sag mid-span

Fabric opacity settled in writing before ordering, light filtering against room darkening against blackout

Side channels and a light-blocking bottom pocket specified where a room has to go dark rather than dim

Light gap per side disclosed at the measure and repeated on the paperwork before the order goes in

Shades over 120 inches tall, or past a 4:1 height-to-width ratio, flagged for larger gaps up front

Factory deduction left with the manufacturer, which is typically 1/16 inch per side

Chain side set window by window so the control lands on the hand you'd naturally reach with

Chain tensioner fastened per the product instructions on every continuous cord loop shade

Cordless and motorized lifts priced where a hanging chain doesn't belong in the room

Hembar chosen against the fabric weight, exposed aluminum or wrapped in the shade fabric

Coupled shades drawn across wide openings so two tubes turn together on a single line

Bracket substrate confirmed ahead of install day so the right anchor or trim screw goes in

Every shade run full travel twice on install day to prove the fabric tracks centered without telescoping

Pricing

What Roller Shades Cost in Cicero

National category numbers put stock shades near $60 to $600 a window and custom-fabricated shades roughly $250 to $2,600. Those are national ranges for the category and they aren't a quote for anything in Cicero. Rollers spread across most of that band, because a roller is really a fabric decision wearing some hardware. A basic light filtering fabric on an open roll with a chain sits low. A blackout fabric in a cassette with side channels and a wrapped hembar sits far higher, and it should, since you're buying a light seal rather than a shade. Motorization is its own line, nationally $300 to $1,500 per window installed. Cicero Window Treatments prices from measured openings across Hamilton County.

By Product

How Roller Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Open roll: The tube and brackets left exposed above the window. It's the least expensive hardware and the most honest looking on a modern opening, though you do see the roll of fabric and the bracket ends from below and from the side.

Fascia: A flat aluminum face that runs across the front of the tube and hides the roll. It gives you a clean horizontal line above the window and it's usually wrapped or powder-coated. Note that reverse roll and fascia don't pair on Lutron systems.

Cassette headbox: A closed box around the tube, open only at the bottom where the fabric comes out. It hides the roll from every angle, keeps dust off the top of the roll, and gives a blackout install somewhere to tuck the top light gap.

Regular roll: Fabric comes off the back of the tube, so it hangs close to the glass. It's the default, it looks tidiest, and it's the roll direction that will foul a crank, a lock or a handle sitting inside the opening if nobody checked.

Reverse roll: Fabric comes off the front of the tube, standing off the glass by an inch or so. Specify it when there's hardware in the opening the fabric has to clear, or when a deep sill would otherwise catch the bottom of the shade.

Light filtering fabric: A woven or vinyl face that passes diffused daylight without a view through it. Rooms stay bright and glare goes soft. It's the everyday specification for a kitchen, a family room or anywhere darkness isn't what you're buying.

Room darkening fabric: A denser fabric that cuts most of the light coming through the face. Bedrooms are the obvious use. Understand that the face is doing the work and the edges are not, so an inside mount still passes light down both sides.

Blackout fabric with side channels: An opaque fabric run inside aluminum channels at each side so the edge light has nowhere to go. Paired with a cassette above and a pocket at the bottom, this is what actually makes a room dark rather than merely dim.

Continuous cord loop with a clutch: A bead chain running over a clutch in the end of the tube, which is the standard manual control. It handles weight well on tall shades. The tensioner has to be fastened to the wall or frame, not left hanging.

Dual bracket: One bracket carrying two tubes at the same window, so a solar screen and a blackout can live together and be used at different hours. It needs mounting depth, which is why we measure for it rather than deciding later.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Cicero room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Roller Shades FAQ

Questions we hear most often from Cicero homeowners considering roller shades.

Because a roller has to clear the opening to travel, and the gap is published rather than hidden. Lutron states 3/4 inch per side on an inside mounted Roller 20/64 plus a factory deduction of 1/16 inch per side, and taller shades get more. In a Tamarack bedroom with a 2019 to 2023 square set opening and no jamb to speak of, that gap sits right where morning light lands. The fixes are an outside mount that overlaps the trim, or side channels that capture the fabric edge. We tell you which one the room needs before we write the order.
It depends on what is in front of the glass. Regular roll brings the fabric down the room side of the tube and hangs closest to the window, which is what you want for a tight light line. Reverse roll drops the fabric off the front of the tube and clears a projecting sill, a crank handle or a deep stool, all common on the 1980s and 1990s reservoir stock in Morse Landing. The tradeoff is real: a reverse roll leaves the tube visible and won't sit behind a fascia, so you lose the option of that clean closed front.
Wide, but wide costs you flatness. A single fabric on a large tube will show a slight smile at the hem and can track a fraction off center over hundreds of cycles, and a lake elevation gets cycled daily. On a 12 foot slider in a Cicero Shores rebuild, where the 2015 to 2022 houses run 3,500 to 6,400 square feet with stacking door walls, we usually split into two shades on a shared headrail with a matched gap, or spec a larger tube diameter. We show you the split line on the wall before you commit to it.
They can, and the mount usually goes outside. The historic plats around Jackson Street carry original casing profiles, storm build ups and shallow or absent jamb returns, so there is often nowhere to put an inside mount bracket. A roller mounted to the casing face with a fabric wrapped cassette gives you a clean line across a tall narrow opening without touching the trim detail. It also lets us overlap the opening by a couple of inches on each side, which closes the light gap that an inside mount in that fabric could never close.
Yes, and we'll be straight about the risk. Roller fabric runs in dye lots, and a solid off white ordered eighteen months apart can land visibly different on the same wall. It shows most on a sunlit elevation where the light passes through the cloth. Where you know more windows are coming, the cheaper move is to order the whole schedule now even if we hang it in two visits. Where that isn't practical, we record the fabric, the lot and the width on your paperwork so the second order starts from a real reference.
Nationally, stock shades run about $60 to $600 per window and custom work runs about $250 to $2,600 per window. Those are national ranges, not Cicero quotes, and no local installed pricing is published anywhere for this trade. What custom buys in this town is fit. Cicero Shores records 40 distinct construction years from 1967 to 2022 under one plat name, so openings vary house to house and even room to room. A stock shade cut to a nominal size in a house like that gives you two different light gaps on one wall.
Roll direction is simply which side of the tube the fabric comes off. On a regular roll it comes off the back and hangs close to the glass, which looks tidiest. On a reverse roll it comes off the front and stands off the glass by an inch or so. It matters because anything living inside the opening, a crank, a lock, a stop or a deep sill, will catch a regular roll. That's a decision made standing at the window with a tape, not afterward from a photo.
On Lutron systems that combination isn't offered, so we design around it rather than pretending otherwise. The reason is geometry: a fascia sits in front of the tube, and a reverse roll brings the fabric down that same front face, so the two want the same space. Other manufacturers handle it differently, and we check the specific line we're quoting instead of stating a universal rule. If you want the fascia look and the fabric needs to clear hardware, a cassette usually solves both.
Open roll is the least expensive and it looks right on a modern opening where exposed hardware isn't a problem. A fascia gives you a flat clean line across the front and hides the roll from below. A cassette wraps the tube on all sides, which hides the roll from every angle and gives a blackout install somewhere to hide the top light gap. Depth is what decides it in practice, since a cassette needs more mounting room than a bare bracket does.
Enough that you should hear the number before you buy. The shade has to be narrower than the opening to travel, so the factory takes its deduction, typically 1/16 inch per side, and light comes down each side of the fabric. Lutron publishes 3/4 inch per side as a real inside-mount figure on Roller 20 and 64. Shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps. If dark is the goal, an outside mount or side channels are the answer.
Room darkening describes the fabric. Blackout describes the whole install. A room darkening fabric blocks most of the light through its face and still passes light around every edge, which is why people call a bedroom dim and feel misled. A genuine blackout is an opaque fabric plus side channels, plus a cassette above and a pocket at the bottom, so the edges are closed too. We separate these in writing before ordering because the words get used loosely everywhere else.
Telescoping is fabric walking sideways on the tube as it rolls, so over a few cycles it creeps toward one end and starts rubbing a bracket. It usually comes from a tube that isn't level, a shade that was forced when it jammed, or fabric cut slightly off square. On a new install it's mostly prevented by mounting the brackets dead level and running the shade full travel twice before we leave. On an existing shade it can sometimes be corrected with shims at one bracket.
Wider than most people need, and the limit is deflection rather than fabric. As a shade gets wide, the tube has to carry its own weight plus the fabric across the span, and a tube that's too small for the width visibly dips in the middle. Manufacturers publish a tube diameter chart against width and fabric weight, and we work from that. Past the practical limit we couple two shades on one line so they turn together and read as a single treatment across the opening.
Chain is the standard and it handles weight best, which matters on a tall shade, but it means a loop hanging beside the window and a tensioner screwed to the wall. Cordless suits smaller shades and rooms where nothing should hang, though a very heavy shade fights a spring. Motors make sense on tall shades, on hard-to-reach windows and on a group you'd rather run together. Hunter Douglas states PowerView battery life is about a year, and batteries are the most under-disclosed cost on a motorized job.
Yes, and it's not a suggestion from us. The tensioner is the small device that anchors the bottom of a continuous cord loop so the chain stays taut against the wall or the frame instead of hanging as a free loop. It ships with the shade, the product instructions require it to be fastened, and a loose loop is exactly the hazard that the ANSI/WCMA A100.1-2022 work on cord access exists to address. We install it as part of the job rather than leaving it in the box.
Yes, on a dual bracket. One bracket carries two tubes at the same opening, so you can run a light filtering or solar fabric during the day and drop a room darkening or blackout shade at night. It's the honest answer when one fabric can't do both jobs, and it beats compromising on a single middle-of-the-road fabric that disappoints in both directions. It needs mounting depth, which is why we measure for the pair rather than adding one later.
Some fabrics curl slightly at the vertical edges over time, particularly lighter weight vinyls in a hot window, and it's a fabric property rather than a defect. Heavier woven fabrics and anything with a knit backing resist it. On the bottom, an exposed aluminum hembar hangs dead straight and is the practical choice on a wide shade, while a hembar wrapped in the fabric looks softer and is better on lighter fabrics. We match the hembar to the fabric weight rather than to a preference.
We can order the same fabric name if it's still in the line, and the color may not be identical. Fabrics run in dye lots, and a bolt woven this year can sit slightly off one woven two years ago, which nobody notices across a house and everybody notices on two windows in the same wall. The practical advice is the same as it is with paint: do a room at once. We write the fabric name and color onto your paperwork so a later order starts from the right reference.
Years, with honest caveats. Solar screen weaves and vinyl-faced fabrics hold up well against direct sun. Lighter decorative fabrics soften and lose color faster on a west or south window than the same fabric on a north one, and the exposed edge that sits outside the roll ages before the rest. Keeping the shade down through the worst afternoon hours actually protects the room behind it, which is the tradeoff. Fading in the room is reduced by the shade, not ended by it.
Two to five weeks is the normal custom fabrication window, with specialty fabrics and anything involving side channels or coupled tubes running toward the longer end. Motorized shades add a step because the tube gets built around the motor. None of that is a delay, it's a factory assembling to your measured sizes. You'll get the fabrication window in writing along with scope, dates and total price, which the Indiana Home Improvement Contract Act requires on residential work over $150.
Areas We Serve

Roller Shades Across Cicero

We measure and install in every one of these Cicero neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Cicero

Cicero Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Cicero

PVC where lake air would move real wood

Learn more →

Wood Blinds in Cicero

Basswood for the dry rooms, honestly specified

Learn more →

Vertical Blinds in Cicero

Built for the door wall, weighted for the breeze

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Cicero

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Cicero, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 863-9966
Service area

Serving Cicero and the surrounding area

Call NowGet Quote